Sale

Antminer S9 ~14.0TH/s @ .098W/GH 16nm ASIC Bitcoin Miner Power Supply Included

Description

Antminer information 

  1. Specifications and other information of the Antminer S9i are as mentioned below.
  2. The shipping for this batch will start on a first-paid-first-ship basis as there is a very limited supply of these units. 
  3. Power consumption figures will vary with your PSU's (power supply unit) efficiency, the ambient operating temperature and the accuracy of the power meter.
  4. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!
  5. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10x PCIE connectors are connected to power supply.

 

Parameters of ANTMINER S9i-14.0

NO.

Parameters

Value

1

Product model

S9i-14.0

2

Total quantity of hash chips

189 PCS

3

Total quantity of hash boards

3 PCS

4

Total hash rate

14.00 TH/s

5

DC voltage input

11.60~13.00 V

6

DC current input @12V DC input

102.3 A +10%

7

DC Power @12V DC input

1228 W +10%

 

8

220VAC Power @25℃ ,93%

conversion efficiency of APW3

 

1320 W +10%

 

9

220VAC Power efficiency @25℃ ,93%

conversion efficiency of APW3

 

94 J/TH +10%

10

Weight(without package)

4.2 kg

11

Operation temperature

0-40 ℃

12

Storage temperature

-40-85 ℃

13

Operation humidity

5%RH-95%RH,prevent condensation

14

Noise

76 dB

15

Networking connection mode

Ethernet Cable

16

Power connection mode

All three PCI-E ports are required topower the board. You can use one PSU

to power multiple boards, but do not attempt to power one board with two PSUs.

We suggest to prevent the control board to be powered up before hash boards be

powered up.

17

Size (Length*Width*Hight)

350mm*135mm*158mm

 

PSU - Power supply unit - Information 

This combo also comes with a Power Supply Unit (PSU) and it is the APW3++.

You must have a PSU for the miner to operate. The APW3++ is Antminers only PSU and is the best PSU for the S9i 14TH.

  1. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
  2. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer S9i miner.
  3. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won't be honored.

Specifications




 

Output

DC Voltage

12.15V

Rated Current
(220V input)

133A

Rated Current
(110V input)

100A

Rated Power
(220V input)

1600W

Rated Power
(110V input)

1200W

Ripple & Noise

<1%

Voltage Regulation

<2%

Source Regulation

<1%

Load Regulation

<1%

Setup, Rise Time

<2S

Power off Protection Trip Time

>9mS

Interface Type

 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)

Noise Level

 <43DB

Input

Voltage Range

100-240V AC

Starting Voltage

95-105V AC

Frequency Range

47-63Hz

Power Factor

>0.95 (full load)

Leakage Current

<1.5mA (220V 50Hz)

Protection

Low-voltage Input

80-89V AC

Output Short Circuit

Yes

Output Overcurrent

134-185A max.

Overheat Protection

Yes

Environment Conditions

Operating Temperature

-20°C - 50°C

Operating Humidity

20% - 90% relative humidity (non-condensing)

Structure

Dimensions

220mm*108mm*62mm

Cooling

Fan

Forced-air cooling

        

                

 

NOTE: The price of bitcoin mining machines has to be adjusted frequently in accordance with variables like the BTC/USD exchange rate, the bitcoin network difficulty, or the expected difficulty increase. Refund requests based on price changes cannot be honored.

Warranty

  1.  A 90-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer contacting support@callcom.co.nz. Overclocking the miner will void the warranty immediately.
  2. The warranty only applies to the original purchaser who purchased the machine directly from Callcom. Once the miner is resold warranty coverage becomes the responsibility of the re-seller.
  3.  All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the warranty policy. After the warranty period, machines can be repaired at the cost of parts and labour.
  4. The following events will void the warranty:
  •      a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;
  •      b. Damage caused by poor power supply, lightning or voltage surges;
  •      c. Burnt parts on hash boards or chips;
  •      d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.
  • For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Callcoms instructions.
  • If you notice there are some loose heatsinks when you receive the miner, please inform us by email to support@callcom.co.nz within 3 days from the date the package is received according to couriers website.
  • Callcom does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

 

.